Difference between revisions of "Housing"
| Line 21: | Line 21: | ||
== Consequence == | == Consequence == | ||
| − | * | + | * A seal can’t prevent from accessing the hardware, but it will provide an indication. |
* Enclose hardware by resin will protect from bypass access but is leading into less possibilities to repair or change a component and by that to less sustainability | * Enclose hardware by resin will protect from bypass access but is leading into less possibilities to repair or change a component and by that to less sustainability | ||
Revision as of 10:01, 27 February 2020
Problem
Attackers can bypass secured connector of the device by accessing hardware components to manipulate components or execute privilege escalation.
Introduction
Hardware components are protected by a housing due safety and security of the device and users. By removing the housing secure device connectors can be bypassed to access directly components to establish connection on hardware pins. This enables direct attacks on a specific hardware component to change the status, read data, change settings or execute privilege escalation.
Detailed description
Housing is a physical shield for protecting hardware. When physical placing a device or for maintenance reasons it is often needed that the housing can be opened (e.g. by unscrew and then removing housing elements). By that, the ability to open the housing can be a functional requirement. But this will add a surface for attackers aiming direct access to hardware components. There is a principle design conflict between enabling authorized access to hardware by removing the housing and prevent or detect unauthorized access.
Solution
Depending on the product lifetime and operation the housing can be:
- Permanently joined to the hardware components and it is not possible to remove housing without destroying the hardware component. This will prevent from bypass attacks of secured connectors.
- The housing can be removed but there are physical signs to indicate, that the housing has been opened.
Implementation
- Physical seal needs to be broken to open the housing. Broken seal indicates an unauthorized access to the hardware
- Screws can be covered by a sealing color. Ruined color indicates, that attempt to unscrew and remove the cover
- Hardware can be enclosed by resin. Removing the resin is difficult without destroying the hardware.
Consequence
- A seal can’t prevent from accessing the hardware, but it will provide an indication.
- Enclose hardware by resin will protect from bypass access but is leading into less possibilities to repair or change a component and by that to less sustainability
== Example == Show the Solution on a real example
Smart Meter Housing protected by Seal